379 28 6585 1 16556 document 6585 cont_cell_micro_-_data_set.xlsx application/vnd.openxmlformats-officedocument.spreadsheetml.sheet a1de824cddce0b4479d023d2e2155851 MD5 249946 2017-06-08 22:53:50 https://researchdata.bath.ac.uk/379/1/cont_cell_micro_-_data_set.xlsx 379 1 1 application/vnd.openxmlformats-officedocument.spreadsheetml.sheet other en public

cont_cell_micro_-_data_set.xlsx

data archive 4562 disk0/00/00/03/79 2017-06-22 21:59:52 2024-07-15 10:58:34 2017-06-22 21:59:52 data_collection show Coombs O'Brien James J.Coombs.Obrien@bath.ac.uk University of Bath TRUE Supervisor Scott Janet L J.L.Scott@bath.ac.uk 0000-0001-8021-2860 University of Bath Supervisor Mattia Davide D.Mattia@bath.ac.uk 0000-0002-7679-4105 University of Bath Supervisor Torrente-Murciano Laura 0000-0002-7938-2587 University of Bath BA0040 BY0060 CA0040 GB0030 dept_chem_eng dept_chem Primary data relevant to figures 3 and 4 in the quoted references (10.1021/acssuschemeng.7b00662). The data for figure 3 consists of laser scattering data expressed as volume percents consisting of three runs per sample. The data for figure 4 is mechanical compression data detailing the force required to compression a sample by a certain percentage. 2017-06-07 University of Bath public RightsHolder University of Bath Engineering and Physical Sciences Research Council https://doi.org/10.13039/501100000266 EP/G03768X/1 Doctoral Training Centre in Sustainable Chemical Technologies The data represented in figure 3 was collected via particle sizing of the formed aqueous microbead dispersions. Each sample was subject to three data collection runs and an average take. The data is expressed as a volume percent. The mechanic compression data collected to produce figure 4 was produced from 10 repeats on beaded samples of varying crosslinking. All data was processed in excel 2016 2014-09-30 2017-05-31 en 1 10.15125/BATH-00379 https://doi.org/10.1021/acssuschemeng.7b00662 pub open