Data for Reduced Repetition Rate Picosecond Ytterbium Mode-locked Fiber Laser Using Hollow Core Fiber
The data used to generate figures 3 - 7. Including: zip file of spectral csv files used to generate the heat map in figure 3; Excel file containing normalised spectra examples from three experimental cavities for figure 4; Excel file containing auto correlation traces from three experimental cavities including a longer time scale trace for the figure inset for figure 5; Excel file containing the measured mode locking and multi-pulsing thresholds of six experimental cavities with theoretical plot for figure 6; and an Excel file containing the multi-pulsing thresholds expressed in nonlinear phase shift normalised to pi shown in figure 7.
Cite this dataset as:
Harvey, C.,
2015.
Data for Reduced Repetition Rate Picosecond Ytterbium Mode-locked Fiber Laser Using Hollow Core Fiber.
Bath: University of Bath Research Data Archive.
Available from: https://doi.org/10.15125/BATH-00132.
Export
Data
Spectral_data_for_heatmap.zip
application/zip (4MB)
Data used to generate figure 3 heatmap. CSV files recorded with yokogawa optical spectrum analyser. File names are arb. units for pump power. These can be converted to the pump power measured after the WDM in mW by filename*0.0513-13.492.
Spectral_data.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (2MB)
Data used to generate figure 4. Includes normalised spectra recorded by a Yokogawa optical spectral analyser. Three sets of spectral data are given as examples from reference cavity, cavity with 20m HCF and cavity with 48m HCF.
Autocorrelation_data.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (21kB)
Data used to generate figure 5. Autocorrelation data recorded using an APE PulseCheck autocorrelator. Traces given are examples from the reference cavity, cavity with 20m of HCF and cavity with 48m HCF taken on a 15ps time scale. The inset trace is a pulse from the reference cavity with a 150ps time scale.
Modelocking_range_data.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (16kB)
Data used to generate figure 6. Points are measured results from experiment. The reference line is the theoretical expected cavity behaviour based on the reference cavity and ideal HCF.
Peak_power_data.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (9kB)
Points used to generate figure 7. Multi-pulsing thresholds are given in peak power and in estimated nonlinear phase shift normalised to pi.
Creators
Clarissa Harvey
University of Bath
Contributors
Fei Yu
Related Person
University of Bath
Jonathan Knight
Supervisor
University of Bath
William Wadsworth
Supervisor
University of Bath
Paulo Almeida
Supervisor
Fianium Ltd
University of Bath
Rights Holder
Documentation
Data collection method:
Spectra in figure 3 and 4 were measured using a yokogawa optical spectrum analyser at the cavity output. Key settings include: resolution of 0.02nm, sample of 25001 data points and a sensitivity setting of high 1. Autocorrelation traces in figure 5 were recorded on an APE PulseCheck autocorrelator using both a 15ps time scale and a 150ps time scale. Key settings were an averaging of 16 points, smoothing was on. Threshold points given in "Modelocking range data.xlsx" for figure 6 were recorded by increasing pump power from 0 to 140mW and recording the pump power where pulse behaviour changed. This was repeated several times over multiple days and the variance in thresholds was incorporated into the error bars. Threshold points given in "Peak power data.xlsx" for figure 7 were also recorded increasing pump power from 0 to 140mW but noting the average output pulse power. Using the measured pulse width and repetition rate the peak power was calculated. This was then used to estimate the peak power and nonlinear phase at each cavity stage using known component parameters. This is then summed up to give the total nonlinear phase shift per cavity round trip.
Funders
Engineering and Physical Sciences Research Council (EPSRC)
https://doi.org/10.13039/501100000266
Industrial CASE Account
EP/K504245/1
Technology Strategy Board (TSB)
https://doi.org/10.13039/501100000396
Grant
TP101503
Fianium ltd.
Publication details
Publication date: 2015
by: University of Bath
Version: 1
DOI: https://doi.org/10.15125/BATH-00132
URL for this record: https://researchdata.bath.ac.uk/id/eprint/132
Related papers and books
Harvey, C. M., Yu, F., Knight, J. C., Wadsworth, W. J., and Almeida, P. J., 2016. Reduced Repetition Rate Yb3+ Mode-Locked Picosecond Fiber Laser With Hollow Core Fiber. IEEE Photonics Technology Letters, 28(6), 669-672. Available from: https://doi.org/10.1109/lpt.2015.2504407.
Contact information
Please contact the Research Data Service in the first instance for all matters concerning this item.
Contact person: Clarissa Harvey
Faculty of Science
Physics
