Dataset for "Reimagining the shape of porous tubular ceramics using 3D printing"
The paper associated with this dataset, "Reimagining the shape of porous tubular ceramics using 3D printing", describes the simulation, design and 3D printing of porous ceramic tubes in sinusoidal and twisted shapes. The designs were based on Computational Fluid Dynamics (CFD) simulations and were fabricated using 3D printing and a thermal post-treatment step. The dataset contains: a) the results of Computational Fluid Dynamics (CFD) simulations for tubes with different design parameters, b) the raw data of rheological characterisation of the 3D printing resin and thermogravimetric analysis (TGA) of the 3D printed structures, c) the raw data of material characterisation and mechanical testing of the sintered ceramic tubes, including X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), mercury intrusion porosimetry, and compression testing.
Cite this dataset as:
Zoumpouli, L.,
Tasso Guaraldo, T.,
Warren, Z.,
Mattia, D.,
Chew, J.,
2024.
Dataset for "Reimagining the shape of porous tubular ceramics using 3D printing".
Bath: University of Bath Research Data Archive.
Available from: https://doi.org/10.15125/BATH-01345.
Export
Data
CFD simulation results.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (15kB)
Creative Commons: Attribution 4.0
The spreadsheet contains two tabs: one for twisted tubes and one for sinusoidal tubes.
3D printing rheometry.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (24kB)
Creative Commons: Attribution 4.0
The spreadsheet contains seven tabs, each for a different type of 3D printing resin.
3D printing TGA.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (2MB)
Creative Commons: Attribution 4.0
Thermogravimetric analysis (TGA) under air or argon of structures 3D printed using different resin compositions.
SEM images.zip
application/zip (6MB)
Creative Commons: Attribution 4.0
Raw SEM images, with the file names referring to manuscript figures.
Sintered titania … Compression.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (1MB)
Creative Commons: Attribution 4.0
The spreadsheet contains three tabs: one for XRD analysis, one for mercury intrusion porosimetry, and one for compression testing.
Creators
Liana Zoumpouli
University of Bath
Thais Tasso Guaraldo
University of Bath
Zachary Warren
University of Bath
Davide Mattia
University of Bath
John Chew
University of Bath
Contributors
University of Bath
Rights Holder
Documentation
Data collection method:
All experimental details including procedures and conditions are fully described in the associated paper.
Technical details and requirements:
The CFD model was developed using the software COMSOL Multiphysics 6.1 and is also fully described in the associated paper.
Funders
Engineering and Physical Sciences Research Council
https://doi.org/10.13039/501100000266
SynHiSel - EPSRC Programme grant
EP/V047078/1
Publication details
Publication date: 21 February 2024
by: University of Bath
Version: 1
DOI: https://doi.org/10.15125/BATH-01345
URL for this record: https://researchdata.bath.ac.uk/id/eprint/1345
Related papers and books
Zoumpouli, G. A., Guaraldo, T. T., Warren, Z., Mattia, D., and Chew, J., 2024. Reimagining the shape of porous tubular ceramics using 3D printing. Applied Materials Today, 37, 102136. Available from: https://doi.org/10.1016/j.apmt.2024.102136.
Contact information
Please contact the Research Data Service in the first instance for all matters concerning this item.
Contact person: Liana Zoumpouli
Faculty of Engineering & Design
Chemical Engineering
