Dataset for ''Tetrabutyl ammonium cation for moisture-resistant and semitransparent perovskite solar cells''
This dataset consists of spreadsheets containing JV curves, UV-Vis spectra and XRD patterns of halide perovskite based films and solar cells. The dataset contains also top-view AFM and SEM images of halide perovskite films and photos of contact angles and profilometer measurements of the surface. These data were taken between February 2017 and July 2017 and they have been used to support the results of the manuscript titled: ''Tetrabutyl ammonium cation for moisture-resistant and semitransparent perovskite solar cells''. The purpose was to collect the data necessary to show the fabrication of halide perovskite solar cells with good photovoltaic performance, higher moisture stability and better morphology than standard perovskite devices. All the data used to support the conclusion of the manuscript are included in the dataset.
Cite this dataset as:
Poli, I.,
2017.
Dataset for ''Tetrabutyl ammonium cation for moisture-resistant and semitransparent perovskite solar cells''.
Bath: University of Bath Research Data Archive.
Available from: https://doi.org/10.15125/BATH-00403.
Export
Data
DataSet.7z
application/x-7z-compressed (14MB)
Creative Commons: Attribution 4.0
All items available for download under a Creative Commons Attribution (CC-BY) licence.
Creators
Isabella Poli
University of Bath
Contributors
Petra Cameron
Supervisor
University of Bath
Salvador Eslava
Supervisor
University of Bath
University of Bath
Rights Holder
Coverage
Collection date(s):
From 1 February 2017 to 30 June 2017
Temporal coverage:
From 1 February 2017 to 21 July 2017
Geographical coverage:
Univeristy of Bath
Documentation
Data collection method:
JV curves and Stability data were measured using a Keithley 2601A potentiostat under 1 sun intensity and AM 1.5. Devices were sweeped at 100 mV/sec from 1.2V to 0V. Data consist of excel spreadsheets with Voltage Vs current. SEM images were taken on a JEOL SEM 6480LV AFM images were taken on a Nanosurf easyscan 2 FlexAFM XRD patterns were measured using a Bruker Adv D8 x-ray diffractometer between 5 and 80 degrees. Data consist of excel spreadsheets with 2theta angle vs intensity peaks UV-Vis spectra were taken on a Perkin Elmer Lambda 750S spectrometer. Data consist of excel spreadsheet with lambda vs reflectance and transmittance intensity
Additional information:
All data have been collected at University of Bath in the Chemistry department and the Microscopy and Analysis Suite (MAS).
Funders
Engineering and Physical Sciences Research Council
https://doi.org/10.13039/501100000266
EPSRC Centre for Doctoral Training in Sustainable Chemical Technologies
EP/L016354/1
Horizon 2020 Framework Programme
https://doi.org/10.13039/100010661
Fellow for Industrial Research Enhancement (FIRE)
665992
Publication details
Publication date: 21 July 2017
by: University of Bath
Version: 1
DOI: https://doi.org/10.15125/BATH-00403
URL for this record: https://researchdata.bath.ac.uk/id/eprint/403
Related papers and books
Poli, I., Eslava, S., and Cameron, P., 2017. Tetrabutylammonium cations for moisture-resistant and semitransparent perovskite solar cells. J. Mater. Chem. A, 5(42), 22325-22333. Available from: https://doi.org/10.1039/c7ta06735f.
Contact information
Please contact the Research Data Service in the first instance for all matters concerning this item.
Contact person: Isabella Poli
Faculty of Science
Chemistry
Faculty of Engineering & Design
Chemical Engineering
