Dataset for Optimization of Drilling Resistance Measurement (DRM) user-controlled variables

Dataset for Optimization of Drilling Resistance Measurement (DRM) user-controlled variables

This data set contains the raw data used to plot Figures 4, 5, 6, 7 and 8 from the paper. These are clearly identified in the spreadsheet alongside the relevant data. A more detailed description is provided below. The dataset provide the raw data used to produce a plot of average drilling resistance versus hole number in an artificial reference stone which was used for wear-correction purposes. (see figure 4) Data used to produce a summary of drilling the data processing methodology used is also provided. This consists of drilling resistance against depth for three representative trials performed on Bath stone at 10 mm/min penetration rate and 600 RPM. The depth specific average resulting from averaging each of the three trials at each particular depth is shown. (see figure 5) Data showing the variation of average drilling resistance with penetration rate and rotational speed on a Bath stone and artificial reference stone is provided. (see figure 6) Data showing the linear relationship between radius-independent average drilling resistance and different PR/RPM settings on Bath stone and artificial reference stone is provided (see figure 7) The coefficient of variation at different PR/RPM settings on Bath stone and artificial reference stone is given.

Keywords:
Drilling Resistance, Bath stone, stone conservation, material characterisation

Cite this dataset as:
Dumitrescu, T., Pesce, G., Ball, R., 2017. Dataset for Optimization of Drilling Resistance Measurement (DRM) user-controlled variables. University of Bath. https://doi.org/10.15125/BATH-00443.

Export

Data

Data.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (79kB)
Creative Commons: Attribution 4.0

Creators

Giovanni Pesce
Northumbria University

Richard Ball
University of Bath

Documentation

Data collection method:

The measurements were made using a SINT Technology cordless Drilling Resistance Measurement System (DRMS), using a polycrystalline diamond-coated, flat-tipped drill bit of 5 mm diameter with back rake angle of 0°. For further details of the methodology, please refer to the associated paper.

Data processing and preparation activities:

Calculations were performed using Microsoft Excel 2016.

Funders

Historic England

Phase 3 Nanolime and Historic Buildings in England
PO 70044336

Historic England

Phase 3 Nanolime and Historic Buildings in England
PO 70056954

Publication details

Publication date: 2017
by: University of Bath

Version: 1

DOI: https://doi.org/10.15125/BATH-00443

URL for this record: https://researchdata.bath.ac.uk/id/eprint/443

Related articles

Dumitrescu, T. F. and Pesce, G. L. A. and Ball, R. J., 2017. Optimization of drilling resistance measurement (DRM) user-controlled variables. Materials and Structures, 50(6). Available from: https://doi.org/10.1617/s11527-017-1113-8.

Contact information

Please contact the Research Data Service in the first instance for all matters concerning this item.

Contact person: Richard Ball

Departments:

Faculty of Engineering & Design
Architecture & Civil Engineering