Dataset for "Reimagining the shape of porous tubular ceramics using 3D printing"

The paper associated with this dataset, "Reimagining the shape of porous tubular ceramics using 3D printing", describes the simulation, design and 3D printing of porous ceramic tubes in sinusoidal and twisted shapes. The designs were based on Computational Fluid Dynamics (CFD) simulations and were fabricated using 3D printing and a thermal post-treatment step. The dataset contains: a) the results of Computational Fluid Dynamics (CFD) simulations for tubes with different design parameters, b) the raw data of rheological characterisation of the 3D printing resin and thermogravimetric analysis (TGA) of the 3D printed structures, c) the raw data of material characterisation and mechanical testing of the sintered ceramic tubes, including X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), mercury intrusion porosimetry, and compression testing.

Keywords:
Computational Fluid Dynamics, additive manufacturing, ceramic tube
Subjects:
Materials processing
Process engineering

Cite this dataset as:
Zoumpouli, L., Tasso Guaraldo, T., Warren, Z., Mattia, D., Chew, J., 2024. Dataset for "Reimagining the shape of porous tubular ceramics using 3D printing". Bath: University of Bath Research Data Archive. Available from: https://doi.org/10.15125/BATH-01345.

Export

[QR code for this page]

Data

CFD simulation results.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (15kB)
Creative Commons: Attribution 4.0

The spreadsheet contains two tabs: one for twisted tubes and one for sinusoidal tubes.

3D printing rheometry.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (24kB)
Creative Commons: Attribution 4.0

The spreadsheet contains seven tabs, each for a different type of 3D printing resin.

3D printing TGA.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (2MB)
Creative Commons: Attribution 4.0

Thermogravimetric analysis (TGA) under air or argon of structures 3D printed using different resin compositions.

SEM images.zip
application/zip (6MB)
Creative Commons: Attribution 4.0

Raw SEM images, with the file names referring to manuscript figures.

Sintered titania … Compression.xlsx
application/vnd.openxmlformats-officedocument.spreadsheetml.sheet (1MB)
Creative Commons: Attribution 4.0

The spreadsheet contains three tabs: one for XRD analysis, one for mercury intrusion porosimetry, and one for compression testing.

Creators

Zachary Warren
University of Bath

Davide Mattia
University of Bath

John Chew
University of Bath

Contributors

University of Bath
Rights Holder

Documentation

Data collection method:

All experimental details including procedures and conditions are fully described in the associated paper.

Technical details and requirements:

The CFD model was developed using the software COMSOL Multiphysics 6.1 and is also fully described in the associated paper.

Funders

Engineering and Physical Sciences Research Council
https://doi.org/10.13039/501100000266

SynHiSel - EPSRC Programme grant
EP/V047078/1

Publication details

Publication date: 21 February 2024
by: University of Bath

Version: 1

DOI: https://doi.org/10.15125/BATH-01345

URL for this record: https://researchdata.bath.ac.uk/id/eprint/1345

Related papers and books

Zoumpouli, G. A., Guaraldo, T. T., Warren, Z., Mattia, D., and Chew, J., 2024. Reimagining the shape of porous tubular ceramics using 3D printing. Applied Materials Today, 37, 102136. Available from: https://doi.org/10.1016/j.apmt.2024.102136.

Contact information

Please contact the Research Data Service in the first instance for all matters concerning this item.

Contact person: Liana Zoumpouli

Departments:

Faculty of Engineering & Design
Chemical Engineering